Yangın söndürücüler - Ithalat/Ihracat

DP System Defender is easy to install, use and maintain. Defender P is apt for fast detection in low temperature environments. The performance-enhanced nozzles in Defender’s technology have a wider range and extinguishing performance than its opponents. Defender’s nozzles are different from its opponents with its non-clogging feature. The total cost of the system is low with a small capacity system cylinder, minimum number of nozzles and less pipe line. Defender’s system cylinder is continuously pressurized. Maintenance and refilling costs are economical. Defender’s activation mechanism can be operated both automatically and manually Defender has an alternative option for applications of all sizes: DP4: 4 Flow system / DP8: 8 Flow system / DP16: 16 Flow system

Easy to install, uses and maintain Wide nozzle coverage Non clogging nozzle Doesn’t have any cartridge, hydraulic or other weak triggering system Doesn’t need any replacement during maintenance DC series performance tested according to EN 17446:2021 - DC series product quality checked regularly by BSI Kitemark

Working Principle: The heat sensitive hose is pierced at the closest point to the flame with the effect of fire temperature, as a result, the FA236 clean gas in the Cylinder is discharged into the room. On the other hand, in-panel extinguishing systems are low pressure and do not cause any damage to the equipment. If it is desired to be informed that the system is working, it can be integrated with an audible or light signal device or it can be provided to inform the general fire alarm panel of the building. In the direct system, the hole in the heat sensitive hose as a result of the fire reduces the pressure in the hose, so the valve is triggered and the gas is discharged from the torn point due to the heat effect. Sensitive detection and extinguishing, proven in the field for 5 years. It has protected many businesses from various sectors from electrical panel fires.

Sizlerin, evlerinizi Yüksek binalar ile toplam kapalı kullanım alanı 1000 m2‘den büyük imalathane, atölye, depo, konaklama, sağlık, toplanma amaçlı ve eğitim binalarında, alanlarının toplamı 600 m2‘den büyük olan kapalı otoparklarda ve ısıl kapasitesi 350 kW’ın üzerindeki kazan dairelerinde yangın dolabı yapılması mecburîdir.